guides:reference:servicetypes:servicetypes_syntax
Table of Contents
Service-type syntax
NetYCE currently supports a wide range of service-type commands. These commands total '327' which can be grouped in '19' object types that these commands manipulate.
Each object type has its internal alias-type that is used here as the alias-name for simplicity, but should be replaced with more descriptive names for any real-life applications.
| Class name | Alias type |
|---|---|
| DOMAIN | <dom> |
| CLIENT | <clnt> |
| SITE | <sit> |
| SERVICE | <srv> |
| NODE | <node> |
| PORT | <port> |
| PORTS | <portlist> |
| LINK | <portlist> |
| SLOT | <slot> |
| SERVER | <server> |
| SUPERNET | <super> |
| SUBNET | <net> |
| DHCP | <dhcp> |
| ADDRESS | <addr> |
| IPV6_NET | <ipv6net> |
| IPV6_ADDR | <ipv6addr> |
| MPLS_VRF | <mpls_vrf> |
| VRF | <vrf> |
| CMDB | <cmdb> |
Domain
The DOMAIN object uses the alias type <dom>
| DOMAIN | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| DOMAIN as new alias | ||||||
| ADD | DOMAIN | CURRENT | DOMAIN_NAME | value | <dom> | create new domain or locate existing. value is new domain name |
| LOCATE | DOMAIN | GLOBAL | DOMAIN_NAME | value | <dom> | find existing domain by name. value is domain name |
| DOMAIN as scope alias | ||||||
| ASSIGN | DOMAIN | <dom> | -attribute- | value | assign the domain attribute a value. replace -attribute- with actual name. | |
| DELETE | DOMAIN | <dom> | COMPLETE | delete Domain including custom parameters, networks and os_images. May not have YCE or CMDB nodes | ||
| DOMAIN alias in other contexts | ||||||
| ADD | CMDB | <dom> | NODE | <node> | <cmdb> | Add a node to the CMDB using Domain alias. value = node-alias, nodename or fqdn |
| ADD | CMDB | <dom> | NODE | value | <cmdb> | Add a node to the CMDB using Domain alias. value = node-alias, nodename or fqdn |
| DOMAIN object in other contexts | ||||||
| ASSIGN | CMDB | <cmdb> | DOMAIN | value | Assign a Domain to a cmdb-node/node-name. value = Domain | |
| ASSIGN | CMDB | <node> | DOMAIN | value | Assign a Domain to a cmdb-node/node-name. value = Domain | |
| DELETE | DOMAIN | GLOBAL | DOMAIN_NAME | value | delete Domain including custom parameters, networks and os_images. May not have YCE or CMDB nodes | |
Client
The CLIENT object uses the alias type <clnt>
| CLIENT | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| CLIENT as new alias | ||||||
| ADD | CLIENT | CURRENT | CLIENT_CODE | value | <clnt> | create new client of active Client_type. value is new client_code |
| LOCATE | CLIENT | CURRENT | CLIENT_CODE | value | <clnt> | find the client in the current client_type with specified client_code. |
| LOCATE | CLIENT | CURRENT | CURRENT | value | <clnt> | find the client in the current client_type with specified client_code. |
| CLIENT as scope alias | ||||||
| ASSIGN | CLIENT | <clnt> | -attribute- | value | set the custom client attibute to the desired value | |
| ASSIGN | CLIENT | <clnt> | PAR_GROUP | value | set the client custom attibute group to the desired value | |
| DELETE | CLIENT | <clnt> | COMPLETE | delete client including sites, services, nodes, subnets, and topology | ||
| CLIENT as value alias | ||||||
| ASSIGN | SERVER | <server> | CLIENT | <clnt> | assign the server to any client alias (move server) | |
| CLIENT alias in other contexts | ||||||
| ADD | SERVER | <clnt> | SERVER_KEY | value | <server> | create server with server_key on client alias |
| ADD | SITE | <clnt> | SITE_CODE | value | <sit> | create new site for client. value is new site_code |
| ADD | SUPERNET | <clnt> | IP_PLAN | value | <super> | add new ip-supernet range to client from pool of free Supernets using numeric ip-plan ID. Or use API custom var “ip_supernet” to specify the supernet |
| ADD | SUPERNET | <clnt> | IP_SUPERNET | value | <super> | add new ip-supernet range to client. Format value as “<net-address>/<prefix>”. Set ip-plan using Assign-Supernet-Ip_plan or use API custom var “ip_plan” |
| LOCATE | NODE | <clnt> | NODE_NAME | value | <node> | find a node given its type in the alased client |
| LOCATE | NODE | <clnt> | NODE_POSITION | value | <node> | find a node given its position in the alased client |
| LOCATE | NODE | <clnt> | NODE_TYPE | value | <node> | find a node given its type in the alased client |
| LOCATE | SERVICE | <clnt> | SERVICE_CLASS | value | <srv> | find the service in the client-alias with the specified service-class |
| LOCATE | SERVICE | <clnt> | SERVICE_NAME | value | <srv> | find the service in the client-alias with the specified service-name |
| LOCATE | SERVICE | <clnt> | SERVICE_TYPE | value | <srv> | find the service in the client-alias with the specified service-type |
| LOCATE | SITE | <clnt> | SITE_CODE | value | <sit> | Locates the named site of the aliased client |
| LOCATE | SUPERNET | <clnt> | IP_PLAN | value | <super> | find the (first) supernet within the client matching the Ip_plan value |
| LOCATE | SUPERNET | <clnt> | IP_SUPERNET | value | <super> | find the supernet within the client matching the “<address>[/<prefix>]” value |
| LOCATE | SERVER | <clnt> | SERVER_NAME | value | <server> | find server with server_name on client alias |
| LOCATE | SERVER | <clnt> | SERVER_KEY | value | <server> | find server with server_key on client alias |
Site
The SITE object uses the alias type <sit>
| SITE | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| SITE as new alias | ||||||
| ADD | SITE | <clnt> | SITE_CODE | value | <sit> | create new site for client. value is new site_code |
| LOCATE | SITE | <clnt> | SITE_CODE | value | <sit> | Locates the named site of the aliased client |
| LOCATE | SITE | GLOBAL | SITE_CODE | value | <sit> | Locates the named site globally |
| SITE as scope alias | ||||||
| ASSIGN | SITE | <sit> | -attribute- | value | set the custom site attibute to the desired value | |
| ASSIGN | SITE | <sit> | PAR_GROUP | value | set the site custom attibute group to the desired value | |
| DELETE | SITE | <sit> | COMPLETE | delete site including services, nodes, subnets and topology | ||
| SITE as value alias | ||||||
| ASSIGN | SERVER | <server> | SITE | <sit> | assign the server to any site alias (move server) | |
| SITE alias in other contexts | ||||||
| ADD | SERVER | <sit> | SERVER_KEY | value | <server> | create server with server_key on site alias |
| ADD | SERVICE | <sit> | CURRENT | value | <srv> | creates a new service container on current site |
| ADD | SERVICE | SITE | SITE_CODE | <sit> | <srv> | creates a new service container on aliased site |
| LOCATE | SERVER | <sit> | SERVER_NAME | value | <server> | find server with server_name on site alias |
| LOCATE | NODE | <sit> | NODE_NAME | value | <node> | find a node given its name on the aliased site |
| LOCATE | NODE | <sit> | NODE_POSITION | value | <node> | find a node given its position on the aliased site |
| LOCATE | NODE | <sit> | NODE_TYPE | value | <node> | find a node given its type on the aliased site |
| LOCATE | SERVICE | <sit> | SERVICE_CLASS | value | <srv> | find the service on the site-alias with the specified service-class |
| LOCATE | SERVICE | <sit> | SERVICE_NAME | value | <srv> | find the service on the site-alias with the specified service-name |
| LOCATE | SERVICE | <sit> | SERVICE_TYPE | value | <srv> | find the service on the site-alias with the specified service-type |
| LOCATE | SERVER | <sit> | SERVER_KEY | value | <server> | find server with server_key on site alias |
Service
The SERVICE object uses the alias type <srv>
| SERVICE | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| SERVICE as new alias | ||||||
| ADD | SERVICE | <sit> | CURRENT | value | <srv> | creates a new service container on current site |
| ADD | SERVICE | SITE | CURRENT | value | <srv> | creates a new service container on current site |
| ADD | SERVICE | SITE | SITE_CODE | <sit> | <srv> | creates a new service container on aliased site |
| LOCATE | SERVICE | CLIENT | CURRENT | <srv> | find the current selected service (tasks only) | |
| LOCATE | SERVICE | CLIENT | SERVICE_CLASS | value | <srv> | find the service in the client with the specified service-class |
| LOCATE | SERVICE | CLIENT | SERVICE_NAME | value | <srv> | find the service in the client with the specified service-name |
| LOCATE | SERVICE | CLIENT | SERVICE_TYPE | value | <srv> | find the service in the client with the specified service-type |
| LOCATE | SERVICE | <clnt> | SERVICE_CLASS | value | <srv> | find the service in the client-alias with the specified service-class |
| LOCATE | SERVICE | <clnt> | SERVICE_NAME | value | <srv> | find the service in the client-alias with the specified service-name |
| LOCATE | SERVICE | <clnt> | SERVICE_TYPE | value | <srv> | find the service in the client-alias with the specified service-type |
| LOCATE | SERVICE | GLOBAL | NODE | <node> | <srv> | find the service the node is part of |
| LOCATE | SERVICE | GLOBAL | NODE | value | <srv> | find the service the node is part of |
| LOCATE | SERVICE | GLOBAL | SERVICE_CLASS | value | <srv> | find the service globally with the specified service-class |
| LOCATE | SERVICE | GLOBAL | SERVICE_NAME | value | <srv> | find the service globally with the specified service-name |
| LOCATE | SERVICE | GLOBAL | SERVICE_TYPE | value | <srv> | find the service globally with the specified service-type |
| LOCATE | SERVICE | SERVICE | CURRENT | <srv> | find the current selected service (tasks only) | |
| LOCATE | SERVICE | <sit> | SERVICE_CLASS | value | <srv> | find the service on the site-alias with the specified service-class |
| LOCATE | SERVICE | <sit> | SERVICE_NAME | value | <srv> | find the service on the site-alias with the specified service-name |
| LOCATE | SERVICE | <sit> | SERVICE_TYPE | value | <srv> | find the service on the site-alias with the specified service-type |
| LOCATE | SERVICE | SITE | SERVICE_CLASS | value | <srv> | find the service on the site with the specified service-class |
| LOCATE | SERVICE | SITE | SERVICE_NAME | value | <srv> | find the service on the site with the specified service-name |
| LOCATE | SERVICE | SITE | SERVICE_TYPE | value | <srv> | find the service on the site with the specified service-type |
| SERVICE as scope alias | ||||||
| ASSIGN | SERVICE | <srv> | -attribute- | value | set the custom service attibute to the desired value | |
| ASSIGN | SERVICE | <srv> | HIERARCHY_ID | value | set the service hierarchy-id to the desired value | |
| ASSIGN | SERVICE | <srv> | PAR_GROUP | value | set the service custom attribute group to the desired value | |
| ASSIGN | SERVICE | <srv> | SERVICE_CLASS | value | set the service class to the desired value | |
| ASSIGN | SERVICE | <srv> | SERVICE_NAME | value | set the service name to the desired value | |
| ASSIGN | SERVICE | <srv> | SERVICE_TYPE | value | set the service type to the desired value | |
| DELETE | SERVICE | <srv> | COMPLETE | delete service including nodes, subnets and topology | ||
| SERVICE as value alias | ||||||
| ASSIGN | SUBNET | <net> | SERVICE | <srv> | re-assign (move) the vlan/subnet to the service indicated | |
| SERVICE alias in other contexts | ||||||
| ADD | IPV6_NET | <srv> | CUSTOM | value | <ipv6net> | add new CUSTOM Ipv6-subnet. No IP-plan is used. Value is the net_name, the ipv6 address range must be assigned later |
| ADD | IPV6_NET | <srv> | NET_NAME | value | <ipv6net> | add an IPV6_NET by name. Value can be “ipv6net_name” or “ipv6_net_name - ipv6_plan_descr” |
| ADD | NODE | <srv> | NODE_TYPE | value | <node> | create new node in a service of specified node-type |
| ADD | SUBNET | <srv> | CUSTOM | value | <net> | add new CUSTOM subnet. No IP-plan is used |
| ADD | SUBNET | <srv> | NET_NAME | value | <net> | locate and add subnet from an IP-plan by name |
| ADD | SUBNET | <srv> | NET_NAME_ NOTFULL | value | <net> | locate and conditionally add subnet from an IP-plan by name should the existing be 'full' |
| ADD | SUBNET | <srv> | NET_NAME_ AT_ADDRESS | value | <net> | create an ip-plan based subnet in a service using net-name AND subnet-address. Value format: “<net_name> <net_address>” |
| ADD | SUBNET | <srv> | NET_NAME_ FROM_ADDRESS | value | <net> | create an ip-plan based subnet in a service using net-name AND subnet-address. Finds the first free subnet. Value format: “<net_name> <net_address>” |
| ADD | SUBNET | <srv> | FIRSTFREE_ FROM_SUBNET | <net> | <net> | create an ip-plan based subnet using existing subnet-alias. Finds the first free subnet |
| ADD | SUBNET | <srv> | FIRSTFREE_ SUBNET_OFFSET | <net> <offset> | <net> | create an ip-plan based subnet using existing subnet-alias. Finds the first free subnet starting from the provided offset |
| LOCATE | IPV6_NET | <srv> | NET_ADDRESS | value | <ipv6net> | find the IPV6_NET in the service using its Ipv6 network-address. Use the optional prefix to normalize the network-address: <Ipv6_address>/<prefix> |
| LOCATE | IPV6_NET | <srv> | VLAN_ID | value | <ipv6net> | find the IPV6_NET in the service using its Vlan_id. The subnet with the fewest assigned ports is selected. |
| LOCATE | IPV6_NET | <srv> | NET_DESCR | value | <ipv6net> | find the IPV6_NET in the service using its Net_description or Net_name. The subnet with the fewest assigned ports is selected. |
| LOCATE | IPV6_NET | <srv> | NET_NAME | value | <ipv6net> | find the IPV6_NET in the service using its Net_name. The subnet with the fewest assigned ports is selected. |
| LOCATE | NODE | <srv> | NODE_NAME | value | <node> | find a node given its type in its service |
| LOCATE | NODE | <srv> | NODE_POSITION | value | <node> | find a node given its position in its service |
| LOCATE | NODE | <srv> | NODE_TYPE | value | <node> | find a node given its type in its service |
| LOCATE | SUBNET | <srv> | NET_ADDRESS | value | <net> | find the subnet in the service by network-address. Value may include the /prefix |
| LOCATE | SUBNET | <srv> | NET_DESCR | value | <net> | locate subnet by description in service |
| LOCATE | SUBNET | <srv> | NET_NAME | value | <net> | locate subnet by name *or* description in service |
| LOCATE | SUBNET | <srv> | NET_NAME_ NOTFULL | value | <net> | find and conditionally add subnet from an IP-plan by name should the existing be 'full' |
| LOCATE | SUBNET | <srv> | VLAN_ID | value | <net> | find the subnet by vlan-id in the service |
| LOCATE | IPV6_NET | <srv> | IPV6_NET | value | <ipv6net> | find the IPV6_NET in the service using Net_name and Ipv6-plan. Type_value uses the format: <ipv6_subnet_name>-<ipv6_plan_description> |
Node
The NODE object uses the alias type <node>
| NODE | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| NODE as new alias | ||||||
| ADD | NODE | <srv> | NODE_TYPE | value | <node> | create new node in a service of specified node-type |
| LOCATE | NODE | CLIENT | NODE_NAME | value | <node> | find a node given its type in the client |
| LOCATE | NODE | CLIENT | NODE_POSITION | value | <node> | find a node given its position in the client |
| LOCATE | NODE | CLIENT | NODE_TYPE | value | <node> | find a node given its type in the client |
| LOCATE | NODE | <clnt> | NODE_NAME | value | <node> | find a node given its type in the alased client |
| LOCATE | NODE | <clnt> | NODE_POSITION | value | <node> | find a node given its position in the alased client |
| LOCATE | NODE | <clnt> | NODE_TYPE | value | <node> | find a node given its type in the alased client |
| LOCATE | NODE | GLOBAL | NODE_NAME | value | <node> | find node using its name. Supports wildcard |
| LOCATE | NODE | <portlist> | DOWNLINK_NODE | <node> | <node> | finds the downlink node relative to the “node” using the topology of the interfaces in “1portlist” |
| LOCATE | NODE | <portlist> | DOWNLINK_NODE | value | <node> | finds the downlink node relative to the “node” using the topology of the interfaces in “2portlist” |
| LOCATE | NODE | <portlist> | PEERLINK_NODE | <node> | <node> | finds the peer/interlink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | PEERLINK_NODE | value | <node> | finds the peer/interlink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | UPLINK_NODE | <node> | <node> | finds the uplink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | UPLINK_NODE | value | <node> | finds the uplink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | SERVICE | CURRENT | <node> | find the selected node in the current service (front-end non-“create” tasks only) | |
| LOCATE | NODE | <sit> | NODE_NAME | value | <node> | find a node given its name on the aliased site |
| LOCATE | NODE | <sit> | NODE_POSITION | value | <node> | find a node given its position on the aliased site |
| LOCATE | NODE | <sit> | NODE_TYPE | value | <node> | find a node given its type on the aliased site |
| LOCATE | NODE | SITE | NODE_NAME | value | <node> | find a node given its name on the site |
| LOCATE | NODE | SITE | NODE_POSITION | value | <node> | find a node given its position on the site |
| LOCATE | NODE | SITE | NODE_TYPE | value | <node> | find a node given its type on the site |
| LOCATE | NODE | <srv> | NODE_NAME | value | <node> | find a node given its type in its service |
| LOCATE | NODE | <srv> | NODE_POSITION | value | <node> | find a node given its position in its service |
| LOCATE | NODE | <srv> | NODE_TYPE | value | <node> | find a node given its type in its service |
| NODE as scope alias | ||||||
| LOCATE | LINK | <node> | NODE | <node> | <portlist> | find the ports involved linking these two nodes |
| ASSIGN | NODE | <node> | -attribute- | value | set the custom node attribute to the desired value | |
| ASSIGN | NODE | <node> | IPSEC_TUNNEL | value | assign node to pre-existing ipsec tunnel-id | |
| ASSIGN | NODE | <node> | NODE_NAME | value | rename existing node to specified name | |
| ASSIGN | NODE | <node> | NODE_POSITION | value | assign a node to a position in the reference-model | |
| ASSIGN | NODE | <node> | PAR_GROUP | value | set the node custom attribute group to the desired value | |
| ASSIGN | NODE | <node> | REDUNDANT | value | rename existing node to specified name | |
| ASSIGN | NODE | <node> | TEMPLATE | value | change Template and ports. Keeps obsolete topo/subnets, keeps port-details | |
| ASSIGN | NODE | <node> | TEMPLATE_ FORCE | value | change Template and ports. Drops obsolete topo/subnets, updates port-details | |
| ASSIGN | NODE | <node> | VRF | <vrf> | make node a member of the MPLS vrf specified | |
| DELETE | NODE | <node> | COMPLETE | delete node including topology | ||
| DELETE | NODE | <node> | VRF | <vrf> | remove node from vrf | |
| NODE as value alias | ||||||
| ADD | CMDB | <dom> | NODE | <node> | <cmdb> | Add a node to the CMDB using Domain alias. value = node-alias, nodename or fqdn |
| LOCATE | LINK | <node> | NODE | <node> | <portlist> | find the ports involved linking these two nodes |
| LOCATE | NODE | <portlist> | DOWNLINK_NODE | <node> | <node> | finds the downlink node relative to the “node” using the topology of the interfaces in “1portlist” |
| LOCATE | NODE | <portlist> | PEERLINK_NODE | <node> | <node> | finds the peer/interlink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | UPLINK_NODE | <node> | <node> | finds the uplink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | PORT | <portlist> | NODE | <node> | <port> | find first port in list matching the node |
| LOCATE | PORTS | <portlist> | NODE | <node> | <portlist> | find ports in list matching the node |
| LOCATE | SERVICE | GLOBAL | NODE | <node> | <srv> | find the service the node is part of |
| LOCATE | CMDB | CMDB | NODE | <node> | <cmdb> | Find a node in the CMDB by node name. value = node-alias, nodename or fqdn |
| ASSIGN | VRF | <vrf> | NODE | <node> | make node a member of the MPLS vrf specified | |
| DELETE | VRF | <vrf> | NODE | <node> | remove node from vrf | |
| DELETE | CMDB | CMDB | NODE | <node> | Delete a node from the CMDB by node name. value = node-alias, nodename or fqdn | |
| NODE alias in other contexts | ||||||
| ADD | PORT | <node> | ATM | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | FAST_ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | FOURTYGIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | GIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | HUNDREDGIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | LOOPBACK | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | MANAGEMENT | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | PORT_CHANNEL | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | PORT_CHANNEL_ NEW | value | <port> | value = lowest portchannel-id number to start search for new id |
| ADD | PORT | <node> | SERIAL | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | TENGIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | TYPE_FROM_ NAME | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | ATM | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | FAST_ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | FOURTYGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | GIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | HUNDREDGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | SERIAL | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | TENGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | TYPE_FROM_ NAME | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | VRF | <node> | VRF_ID | value | <vrf> | create vrf on node using its id. Note: node must have management / loopback address assigned first! |
| ADD | VRF | <node> | VRF_NAME | value | <vrf> | create vrf on node using its name. Note: node must have management / loopback address assigned first! |
| ADD | VRF | <node> | MPLS_VRF | mpls_vrf | <vrf> | create vrf on node using a Mpls_vrf alias. Note: node must have management / loopback address assigned first! |
| LOCATE | LINK | <node> | PORT_TEMPLATE | value | <portlist> | find the ports involved in a link using a local port-template |
| LOCATE | VRF | <node> | VRF_NAME | value | <vrf> | find a vrf on the node using its name |
| LOCATE | PORT | <node> | PORT_NAME | value | <port> | find first port of a node matching the (wildcard) port-name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORT | <node> | PORT_TEMPLATE | value | <port> | find first port using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ FIRST | value | <port> | find first port using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ FIRSTNOTOPO | value | <port> | find first port without topology using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ FIRSTSHUT | value | <port> | find first disabled port with this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ LAST | value | <port> | find last port using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ LASTNOTOPO | value | <port> | find first port without topology using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ LASTSHUT | value | <port> | find last disabled port with this template. Wildcard optional |
| LOCATE | PORTS | <node> | ATM | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | FAST_ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | FOURTYGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | GIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | HUNDREDGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | LOOPBACK | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | MANAGEMENT | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | PORT_CHANNEL | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | PORT_TEMPLATE_ ALL | value | <portlist> | find all ports in list with this template |
| LOCATE | PORTS | <node> | PORT_TEMPLATE_ ALLNOTOPO | value | <portlist> | find all ports in list with this template without topology |
| LOCATE | PORTS | <node> | SERIAL | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | TENGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | SLOT | <node> | SLOT_ID | value | <slot> | find all interfaces using slot_id. Value format = slot[/module]. You can use '/' to indicate blank slot/module |
| LOCATE | VRF | <node> | VRF_ID | value | <vrf> | find a vrf on the node using its id |
| LOCATE | ADDRESS | <node> | MANAGEMENT | <addr> | Returns the management ip-address for the <node> as an <addr> alias | |
| LOCATE | PORTS | <node> | PORT_NAME | value | <portlist> | find all ports of a node matching the (wildcard) port-name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORTS | <node> | -attribute- | value | <portlist> | find all ports of a node matching the (wildcard) attribute value |
| LOCATE | PORT | <node> | -attribute- | value | <port> | find first port of a node matching the (wildcard) attribute value |
| ASSIGN | EVPN_VLAN | <node> | EVPN_CORE | <node> | assign eVPN to a core-node by node-alias | |
| ASSIGN | EVPN_VLAN | <node> | EVPN_CORE | value | assign eVPN to a core-node by name | |
| ASSIGN | CMDB | <node> | VENDOR | value | Assign a Vendor to a cmdb-alias/node-name. value = Vendor_type name | |
| ASSIGN | CMDB | <node> | FQDN | value | Assign a fqdn (NodeName) to a cmdb-node/node-name. value = fqdn or ip-address | |
| ASSIGN | CMDB | <node> | DOMAIN | value | Assign a Domain to a cmdb-node/node-name. value = Domain | |
| ASSIGN | CMDB | <node> | -attribute- | value | Assign a value to any attribute of a cmdb-node/node-name. Replace -attribute for attribute name. value = attribute value | |
| DELETE | SLOT | <node> | SLOT_ID | value | remove ports based on slot-id, delete any attached topology | |
| NODE object in other contexts | ||||||
| ADD | CMDB | <dom> | NODE | value | <cmdb> | Add a node to the CMDB using Domain alias. value = node-alias, nodename or fqdn |
| LOCATE | SERVICE | GLOBAL | NODE | value | <srv> | find the service the node is part of |
| LOCATE | CMDB | CMDB | NODE | value | <cmdb> | Find a node in the CMDB by node name. value = node-alias, nodename or fqdn |
| DELETE | CMDB | CMDB | NODE | value | Delete a node from the CMDB by node name. value = node-alias, nodename or fqdn | |
Port
The PORT object uses the alias type <port>
| PORT | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| PORT as new alias | ||||||
| ADD | PORT | <node> | ATM | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | FAST_ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | FOURTYGIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | GIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | HUNDREDGIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | LOOPBACK | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | MANAGEMENT | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | PORT_CHANNEL | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | PORT_CHANNEL_ NEW | value | <port> | value = lowest portchannel-id number to start search for new id |
| ADD | PORT | <node> | SERIAL | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | TENGIGABIT_ ETHERNET | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORT | <node> | TYPE_FROM_ NAME | value | <port> | value Interface-name: [type][slot/][module/]port. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| LOCATE | PORT | <node> | PORT_NAME | value | <port> | find first port of a node matching the (wildcard) port-name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORT | <node> | PORT_TEMPLATE | value | <port> | find first port using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ FIRST | value | <port> | find first port using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ FIRSTNOTOPO | value | <port> | find first port without topology using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ FIRSTSHUT | value | <port> | find first disabled port with this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ LAST | value | <port> | find last port using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ LASTNOTOPO | value | <port> | find first port without topology using this template. Wildcard optional |
| LOCATE | PORT | <node> | PORT_TEMPLATE_ LASTSHUT | value | <port> | find last disabled port with this template. Wildcard optional |
| LOCATE | PORT | <port> | AT_SUBNET | <net> | <port> | Locate the given port if assigned to the given subnet. Port and subnet are aliases |
| LOCATE | PORT | <portlist> | NODE | <node> | <port> | find first port in list matching the node |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ FIRST | value | <port> | find first port in list with this template |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ FIRSTNOTOPO | value | <port> | find first port in list with this template without topology |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ LAST | value | <port> | find last port in list with this template |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ LASTNOTOPO | value | <port> | find last port in list with this template without topology |
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ FIRST | value | <port> | find first port in list with this template |
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ FIRSTNOTOPO | value | <port> | find first port in list with this template without topology |
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ LAST | value | <port> | find last port in list with this template |
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ LASTNOTOPO | value | <port> | find last port in list with this template without topology |
| LOCATE | PORT | <port> | AT_IPV6_NET | <ipv6net> | <port> | Locate the given port if assigned to the given Ipv6 subnet. Port and Ipv6 subnet are aliases |
| LOCATE | PORT | <portlist> | PORT_NAME | value | <port> | find first port within a portlist matching the (wildcard) name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORT | <node> | -attribute- | value | <port> | find first port of a node matching the (wildcard) attribute value |
| LOCATE | PORT | <portlist> | -attribute- | value | <port> | find first port within a portlist matching the (wildcard) attrbute value |
| PORT as scope alias | ||||||
| ADD | LINK | <port> | PORT | <port> | <portlist> | connect two ports using topology |
| LOCATE | PORT | <port> | AT_SUBNET | <net> | <port> | Locate the given port if assigned to the given subnet. Port and subnet are aliases |
| LOCATE | PORT | <port> | AT_IPV6_NET | <ipv6net> | <port> | Locate the given port if assigned to the given Ipv6 subnet. Port and Ipv6 subnet are aliases |
| ASSIGN | PORT | <port> | -attribute- | value | assign port attribute a value. replace -attribute- with actual name. | |
| ASSIGN | PORT | <port> | PORT_CHANNEL | value | make the port a port-channel member of specified channel-id | |
| ASSIGN | PORT | <port> | PORT_CHANNEL_ OF | <port> | make the port a member of the channel-group of the other port | |
| ASSIGN | PORT | <port> | PORT_DESCR | value | update the port_description. Defaults to template-description | |
| ASSIGN | PORT | <port> | PORT_MODE | value | set the duplex mode of the port | |
| ASSIGN | PORT | <port> | PORT_NAME_OF | <port> | move the port to the other port's location. Drops the target port along with topo/subs | |
| ASSIGN | PORT | <port> | PORT_SHUT | value | enable or disable the port (shut=Y → disabled) | |
| ASSIGN | PORT | <port> | PORT_SPEED | value | set the port speed in Mbps | |
| ASSIGN | PORT | <port> | PORT_TEMPLATE | value | set the port's port-template | |
| ASSIGN | PORT | <port> | PORT_TEMPLATE_ OF | <port> | set the port's port-template to that of the other port | |
| ASSIGN | PORT | <port> | SUBNET | <net> | make the port a member of the vlan/subnet | |
| ASSIGN | PORT | <port> | IPV6_NET | <ipv6net> | make the port a member of the Ipv6 vlan/subnet | |
| DELETE | PORT | <port> | COMPLETE | delete port including topology | ||
| DELETE | PORT | <port> | SUBNET | <net> | remove subnet from port | |
| DELETE | PORT | <port> | SUBNET_ALL | remove all subnet assignments from aliased port | ||
| DELETE | PORT | <port> | TOPOLOGY | remove topology from port | ||
| PORT as value alias | ||||||
| ADD | LINK | <port> | PORT | <port> | <portlist> | connect two ports using topology |
| ASSIGN | ADDRESS | <addr> | PORT | <port> | set a single IP-address on a Management or Loopback interface | |
| ASSIGN | IPV6_ADDR | <ipv6addr> | PORT | <port> | set a single IP-IPV6_ADDR on a Management or Loopback interface | |
| ASSIGN | IPV6_NET | <ipv6net> | PORT | <port> | make the port a member of the Ipv6 vlan/subnet | |
| ASSIGN | PORT | <port> | PORT_CHANNEL_ OF | <port> | make the port a member of the channel-group of the other port | |
| ASSIGN | PORT | <port> | PORT_NAME_OF | <port> | move the port to the other port's location. Drops the target port along with topo/subs | |
| ASSIGN | PORT | <port> | PORT_TEMPLATE_ OF | <port> | set the port's port-template to that of the other port | |
| ASSIGN | SUBNET | <net> | PORT | <port> | make the port a member of the vlan/subnet | |
| DELETE | IPV6_NET | <ipv6net> | PORT | <port> | remove IPV6_NET from port | |
| DELETE | SUBNET | <net> | PORT | <port> | remove subnet from port | |
| PORT alias in other contexts | ||||||
| LOCATE | SUBNET | <net> | AT_PORT | <port> | <net> | Locate the given subnet if assigned to the given port. Subnet and port are aliases |
| LOCATE | IPV6_NET | <ipv6net> | AT_PORT | <port> | <ipv6net> | Locate the given Ipv6 subnet if assigned to the given port. Ipv6 subnet and port are aliases |
| ASSIGN | PORTS | <portlist> | PORT_CHANNEL_ OF | <port> | make the ports a member of the channel-group of the other port | |
| ASSIGN | PORTS | <portlist> | PORT_TEMPLATE_ OF | <port> | set the port port-template to that of the other port | |
Ports
The PORTS object uses the alias type <portlist>
| PORTS | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| PORTS as new alias | ||||||
| ADD | PORTS | <node> | ATM | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | FAST_ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | FOURTYGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | GIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | HUNDREDGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | SERIAL | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | TENGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | TYPE_FROM_ NAME | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| LOCATE | PORTS | <node> | ATM | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | FAST_ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | FOURTYGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | GIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | HUNDREDGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | LOOPBACK | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | MANAGEMENT | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | PORT_CHANNEL | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | PORT_TEMPLATE_ ALL | value | <portlist> | find all ports in list with this template |
| LOCATE | PORTS | <node> | PORT_TEMPLATE_ ALLNOTOPO | value | <portlist> | find all ports in list with this template without topology |
| LOCATE | PORTS | <node> | SERIAL | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | TENGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <portlist> | AT_SUBNET | <net> | <portlist> | Locate ports in the given list if assigned to the given subnet. Ports and subnet are aliases |
| LOCATE | PORTS | <portlist> | NODE | <node> | <portlist> | find ports in list matching the node |
| LOCATE | PORTS | <portlist> | PORT_TEMPLATE_ ALL | value | <portlist> | find all the ports in list with this template |
| LOCATE | PORTS | <portlist> | AT_IPV6_NET | <ipv6net> | <portlist> | Locate ports in the given list if assigned to the given Ipv6 subnet. Ports and Ipv6 subnet are aliases |
| LOCATE | PORTS | <node> | PORT_NAME | value | <portlist> | find all ports of a node matching the (wildcard) port-name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORTS | <portlist> | PORT_NAME | value | <portlist> | find ports within a portlist matching the (wildcard) name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORTS | <node> | -attribute- | value | <portlist> | find all ports of a node matching the (wildcard) attribute value |
| LOCATE | PORTS | <portlist> | -attribute- | value | <portlist> | find ports within a portlist matching the (wildcard) attrbute value |
| PORTS as scope alias | ||||||
| LOCATE | PORTS | <portlist> | AT_SUBNET | <net> | <portlist> | Locate ports in the given list if assigned to the given subnet. Ports and subnet are aliases |
| LOCATE | PORTS | <portlist> | NODE | <node> | <portlist> | find ports in list matching the node |
| LOCATE | PORTS | <portlist> | PORT_TEMPLATE_ ALL | value | <portlist> | find all the ports in list with this template |
| LOCATE | PORTS | <portlist> | AT_IPV6_NET | <ipv6net> | <portlist> | Locate ports in the given list if assigned to the given Ipv6 subnet. Ports and Ipv6 subnet are aliases |
| LOCATE | PORTS | <portlist> | PORT_NAME | value | <portlist> | find ports within a portlist matching the (wildcard) name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORTS | <portlist> | -attribute- | value | <portlist> | find ports within a portlist matching the (wildcard) attrbute value |
| ASSIGN | PORTS | <portlist> | -attribute- | value | assign port attribute a value. replace -attribute- with actual name. | |
| ASSIGN | PORTS | <portlist> | PORT_CHANNEL | value | make the ports a port-channel member of specified channel-id | |
| ASSIGN | PORTS | <portlist> | PORT_CHANNEL_ OF | <port> | make the ports a member of the channel-group of the other port | |
| ASSIGN | PORTS | <portlist> | PORT_MODE | value | set the duplex mode of the ports | |
| ASSIGN | PORTS | <portlist> | PORT_SHUT | value | enable or disable the ports (shut=Y → disabled) | |
| ASSIGN | PORTS | <portlist> | PORT_SPEED | value | set the ports speed in Mbps | |
| ASSIGN | PORTS | <portlist> | PORT_TEMPLATE | value | set the ports port-template | |
| ASSIGN | PORTS | <portlist> | PORT_TEMPLATE_ OF | <port> | set the port port-template to that of the other port | |
| ASSIGN | PORTS | <portlist> | SUBNET | <net> | make the ports a member of the vlan/subnet | |
| ASSIGN | PORTS | <portlist> | IPV6_NET | <ipv6net> | make the ports a member of the Ipv6 vlan/subnet | |
| DELETE | PORTS | <portlist> | COMPLETE | delete ports including topology | ||
| DELETE | PORTS | <portlist> | SUBNET | <net> | remove subnet from ports | |
| DELETE | PORTS | <portlist> | SUBNET_ALL | remove all subnet assignments from aliased ports | ||
| DELETE | PORTS | <portlist> | TOPOLOGY | remove topology from ports | ||
| PORTS as value alias | ||||||
| ASSIGN | IPV6_NET | <ipv6net> | PORTS | <portlist> | make the ports a member of the Ipv6 vlan/subnet | |
| ASSIGN | SUBNET | <net> | PORTS | <portlist> | make the ports a member of the vlan/subnet | |
| DELETE | IPV6_NET | <ipv6net> | PORTS | <portlist> | remove IPV6_NET from ports | |
| DELETE | SUBNET | <net> | PORTS | <portlist> | remove subnet from ports | |
| PORTS alias in other contexts | ||||||
| ADD | LINK | <port> | PORT | <port> | <portlist> | connect two ports using topology |
| LOCATE | LINK | <node> | NODE | <node> | <portlist> | find the ports involved linking these two nodes |
| LOCATE | LINK | <node> | PORT_TEMPLATE | value | <portlist> | find the ports involved in a link using a local port-template |
| LOCATE | NODE | <portlist> | DOWNLINK_NODE | <node> | <node> | finds the downlink node relative to the “node” using the topology of the interfaces in “1portlist” |
| LOCATE | NODE | <portlist> | DOWNLINK_NODE | value | <node> | finds the downlink node relative to the “node” using the topology of the interfaces in “2portlist” |
| LOCATE | NODE | <portlist> | PEERLINK_NODE | <node> | <node> | finds the peer/interlink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | PEERLINK_NODE | value | <node> | finds the peer/interlink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | UPLINK_NODE | <node> | <node> | finds the uplink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | UPLINK_NODE | value | <node> | finds the uplink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | PORT | <portlist> | NODE | <node> | <port> | find first port in list matching the node |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ FIRST | value | <port> | find first port in list with this template |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ FIRSTNOTOPO | value | <port> | find first port in list with this template without topology |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ LAST | value | <port> | find last port in list with this template |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ LASTNOTOPO | value | <port> | find last port in list with this template without topology |
| LOCATE | PORT | <portlist> | PORT_NAME | value | <port> | find first port within a portlist matching the (wildcard) name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORT | <portlist> | -attribute- | value | <port> | find first port within a portlist matching the (wildcard) attrbute value |
| ASSIGN | SUBNET | <net> | LINK | <portlist> | make the ports of the link a member of the vlan/subnet | |
| ASSIGN | IPV6_NET | <ipv6net> | LINK | <portlist> | make the ports of the link a member of the Ipv6 vlan/subnet | |
| ASSIGN | LINK | <portlist> | IPV6_NET | <ipv6net> | make the ports of the link a member of the Ipv6 vlan/subnet | |
Link
The LINK object uses the alias type <portlist>
| LINK | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| LINK as new alias | ||||||
| ADD | LINK | <port> | PORT | <port> | <portlist> | connect two ports using topology |
| LOCATE | LINK | <node> | NODE | <node> | <portlist> | find the ports involved linking these two nodes |
| LOCATE | LINK | <node> | PORT_TEMPLATE | value | <portlist> | find the ports involved in a link using a local port-template |
| LINK as scope alias | ||||||
| ASSIGN | LINK | <portlist> | IPV6_NET | <ipv6net> | make the ports of the link a member of the Ipv6 vlan/subnet | |
| LINK as value alias | ||||||
| ASSIGN | SUBNET | <net> | LINK | <portlist> | make the ports of the link a member of the vlan/subnet | |
| ASSIGN | IPV6_NET | <ipv6net> | LINK | <portlist> | make the ports of the link a member of the Ipv6 vlan/subnet | |
| LINK alias in other contexts | ||||||
| ADD | PORTS | <node> | ATM | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | FAST_ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | FOURTYGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | GIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | HUNDREDGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | SERIAL | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | TENGIGABIT_ ETHERNET | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| ADD | PORTS | <node> | TYPE_FROM_ NAME | value | <portlist> | value Interface-name: [type][slot/][module/]port[-port]. Type may be vendor interface-name or NetYCE internal Port_class and overrides type in command |
| LOCATE | NODE | <portlist> | DOWNLINK_NODE | <node> | <node> | finds the downlink node relative to the “node” using the topology of the interfaces in “1portlist” |
| LOCATE | NODE | <portlist> | DOWNLINK_NODE | value | <node> | finds the downlink node relative to the “node” using the topology of the interfaces in “2portlist” |
| LOCATE | NODE | <portlist> | PEERLINK_NODE | <node> | <node> | finds the peer/interlink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | PEERLINK_NODE | value | <node> | finds the peer/interlink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | UPLINK_NODE | <node> | <node> | finds the uplink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | NODE | <portlist> | UPLINK_NODE | value | <node> | finds the uplink node relative to the “node” using the topology of the interfaces in “portlist” |
| LOCATE | PORT | <portlist> | NODE | <node> | <port> | find first port in list matching the node |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ FIRST | value | <port> | find first port in list with this template |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ FIRSTNOTOPO | value | <port> | find first port in list with this template without topology |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ LAST | value | <port> | find last port in list with this template |
| LOCATE | PORT | <portlist> | PORT_TEMPLATE_ LASTNOTOPO | value | <port> | find last port in list with this template without topology |
| LOCATE | PORTS | <node> | ATM | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | FAST_ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | FOURTYGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | GIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | HUNDREDGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | LOOPBACK | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | MANAGEMENT | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | PORT_CHANNEL | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | PORT_TEMPLATE_ ALL | value | <portlist> | find all ports in list with this template |
| LOCATE | PORTS | <node> | PORT_TEMPLATE_ ALLNOTOPO | value | <portlist> | find all ports in list with this template without topology |
| LOCATE | PORTS | <node> | SERIAL | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <node> | TENGIGABIT_ ETHERNET | value | <portlist> | value format= slot[/module]/port[-port]. Use '*' for any slot, module or port |
| LOCATE | PORTS | <portlist> | AT_SUBNET | <net> | <portlist> | Locate ports in the given list if assigned to the given subnet. Ports and subnet are aliases |
| LOCATE | PORTS | <portlist> | NODE | <node> | <portlist> | find ports in list matching the node |
| LOCATE | PORTS | <portlist> | PORT_TEMPLATE_ ALL | value | <portlist> | find all the ports in list with this template |
| LOCATE | PORTS | <portlist> | AT_IPV6_NET | <ipv6net> | <portlist> | Locate ports in the given list if assigned to the given Ipv6 subnet. Ports and Ipv6 subnet are aliases |
| LOCATE | PORTS | <node> | PORT_NAME | value | <portlist> | find all ports of a node matching the (wildcard) port-name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORTS | <portlist> | PORT_NAME | value | <portlist> | find ports within a portlist matching the (wildcard) name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORT | <portlist> | PORT_NAME | value | <port> | find first port within a portlist matching the (wildcard) name. Use internal or vendor name e.g.: Gi01/01/1*, GigabitEthernet/1/1* |
| LOCATE | PORTS | <node> | -attribute- | value | <portlist> | find all ports of a node matching the (wildcard) attribute value |
| LOCATE | PORTS | <portlist> | -attribute- | value | <portlist> | find ports within a portlist matching the (wildcard) attrbute value |
| LOCATE | PORT | <portlist> | -attribute- | value | <port> | find first port within a portlist matching the (wildcard) attrbute value |
| ASSIGN | IPV6_NET | <ipv6net> | PORTS | <portlist> | make the ports a member of the Ipv6 vlan/subnet | |
| ASSIGN | PORTS | <portlist> | -attribute- | value | assign port attribute a value. replace -attribute- with actual name. | |
| ASSIGN | PORTS | <portlist> | PORT_CHANNEL | value | make the ports a port-channel member of specified channel-id | |
| ASSIGN | PORTS | <portlist> | PORT_CHANNEL_ OF | <port> | make the ports a member of the channel-group of the other port | |
| ASSIGN | PORTS | <portlist> | PORT_MODE | value | set the duplex mode of the ports | |
| ASSIGN | PORTS | <portlist> | PORT_SHUT | value | enable or disable the ports (shut=Y → disabled) | |
| ASSIGN | PORTS | <portlist> | PORT_SPEED | value | set the ports speed in Mbps | |
| ASSIGN | PORTS | <portlist> | PORT_TEMPLATE | value | set the ports port-template | |
| ASSIGN | PORTS | <portlist> | PORT_TEMPLATE_ OF | <port> | set the port port-template to that of the other port | |
| ASSIGN | PORTS | <portlist> | SUBNET | <net> | make the ports a member of the vlan/subnet | |
| ASSIGN | SUBNET | <net> | PORTS | <portlist> | make the ports a member of the vlan/subnet | |
| ASSIGN | PORTS | <portlist> | IPV6_NET | <ipv6net> | make the ports a member of the Ipv6 vlan/subnet | |
| DELETE | IPV6_NET | <ipv6net> | PORTS | <portlist> | remove IPV6_NET from ports | |
| DELETE | PORTS | <portlist> | COMPLETE | delete ports including topology | ||
| DELETE | PORTS | <portlist> | SUBNET | <net> | remove subnet from ports | |
| DELETE | PORTS | <portlist> | SUBNET_ALL | remove all subnet assignments from aliased ports | ||
| DELETE | PORTS | <portlist> | TOPOLOGY | remove topology from ports | ||
| DELETE | SUBNET | <net> | PORTS | <portlist> | remove subnet from ports | |
Slot
The SLOT object uses the alias type <slot>
| SLOT | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| SLOT as new alias | ||||||
| LOCATE | SLOT | <node> | SLOT_ID | value | <slot> | find all interfaces using slot_id. Value format = slot[/module]. You can use '/' to indicate blank slot/module |
| SLOT as scope alias | ||||||
| ASSIGN | SLOT | <slot> | SLOT_ID | value | Move all interfaces to a new slot_id. Value format = slot[/module]. You can use '/' to indicate blank slot/module | |
| SLOT alias in other contexts | ||||||
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ FIRST | value | <port> | find first port in list with this template |
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ FIRSTNOTOPO | value | <port> | find first port in list with this template without topology |
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ LAST | value | <port> | find last port in list with this template |
| LOCATE | PORT | <slot> | PORT_TEMPLATE_ LASTNOTOPO | value | <port> | find last port in list with this template without topology |
| SLOT object in other contexts | ||||||
| DELETE | SLOT | <node> | SLOT_ID | value | remove ports based on slot-id, delete any attached topology | |
Server
The SERVER object uses the alias type <server>
| SERVER | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| SERVER as new alias | ||||||
| ADD | SERVER | <clnt> | SERVER_KEY | value | <server> | create server with server_key on client alias |
| ADD | SERVER | <sit> | SERVER_KEY | value | <server> | create server with server_key on site alias |
| LOCATE | SERVER | <sit> | SERVER_NAME | value | <server> | find server with server_name on site alias |
| LOCATE | SERVER | <sit> | SERVER_KEY | value | <server> | find server with server_key on site alias |
| LOCATE | SERVER | <clnt> | SERVER_NAME | value | <server> | find server with server_name on client alias |
| LOCATE | SERVER | <clnt> | SERVER_KEY | value | <server> | find server with server_key on client alias |
| SERVER as scope alias | ||||||
| ASSIGN | SERVER | <server> | SERVER_NAME | value | set the server hostname to value | |
| ASSIGN | SERVER | <server> | SERVER_STATUS | value | set the server status to value (numeric) | |
| ASSIGN | SERVER | <server> | SERVER_NOTES | value | set the server description to value | |
| ASSIGN | SERVER | <server> | CLIENT | <clnt> | assign the server to any client alias (move server) | |
| ASSIGN | SERVER | <server> | SITE | <sit> | assign the server to any site alias (move server) | |
| ASSIGN | SERVER | <server> | SERVER_ ADDRESS | value | set the server ipv4-address to value | |
| ASSIGN | SERVER | <server> | SERVER_ IPV6_ADDR | value | set the server ipv6-address to value | |
| DELETE | SERVER | <server> | COMPLETE | remove the server | ||
Supernet
The SUPERNET object uses the alias type <super>
| SUPERNET | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| SUPERNET as new alias | ||||||
| ADD | SUPERNET | <clnt> | IP_PLAN | value | <super> | add new ip-supernet range to client from pool of free Supernets using numeric ip-plan ID. Or use API custom var “ip_supernet” to specify the supernet |
| ADD | SUPERNET | <clnt> | IP_SUPERNET | value | <super> | add new ip-supernet range to client. Format value as “<net-address>/<prefix>”. Set ip-plan using Assign-Supernet-Ip_plan or use API custom var “ip_plan” |
| LOCATE | SUPERNET | <clnt> | IP_PLAN | value | <super> | find the (first) supernet within the client matching the Ip_plan value |
| LOCATE | SUPERNET | <clnt> | IP_SUPERNET | value | <super> | find the supernet within the client matching the “<address>[/<prefix>]” value |
| SUPERNET as scope alias | ||||||
| ASSIGN | SUPERNET | <super> | DNS_DOMAIN | value | assign the value to the supernet Dns_domain attribute | |
| ASSIGN | SUPERNET | <super> | IP_PLAN | value | assign the numeric ip-plan ID to the supernet-alias. Supernet and plan prefixes must match. Cannot change a supernet plan-id which has active subnets | |
| ASSIGN | SUPERNET | <super> | SITE_CODE | value | assign the value to the Supernet SiteCode attribute. SiteCode must exist in Client | |
| DELETE | SUPERNET | <super> | COMPLETE | remove the supernet from the client after DELETING all its subnets. Place supernet in free pool | ||
| DELETE | SUPERNET | <super> | FREE | remove the supernet from the client IF there are no subnets left. Place supernet in free pool | ||
Subnet
The SUBNET object uses the alias type <net>
| SUBNET | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| SUBNET as new alias | ||||||
| ADD | SUBNET | <srv> | CUSTOM | value | <net> | add new CUSTOM subnet. No IP-plan is used |
| ADD | SUBNET | <srv> | NET_NAME | value | <net> | locate and add subnet from an IP-plan by name |
| ADD | SUBNET | <srv> | NET_NAME_ NOTFULL | value | <net> | locate and conditionally add subnet from an IP-plan by name should the existing be 'full' |
| ADD | SUBNET | <srv> | NET_NAME_ AT_ADDRESS | value | <net> | create an ip-plan based subnet in a service using net-name AND subnet-address. Value format: “<net_name> <net_address>” |
| ADD | SUBNET | <srv> | NET_NAME_ FROM_ADDRESS | value | <net> | create an ip-plan based subnet in a service using net-name AND subnet-address. Finds the first free subnet. Value format: “<net_name> <net_address>” |
| ADD | SUBNET | <srv> | FIRSTFREE_ FROM_SUBNET | <net> | <net> | create an ip-plan based subnet using existing subnet-alias. Finds the first free subnet |
| ADD | SUBNET | <srv> | FIRSTFREE_ SUBNET_OFFSET | <net> <offset> | <net> | create an ip-plan based subnet using existing subnet-alias. Finds the first free subnet starting from the provided offset |
| LOCATE | SUBNET | <net> | AT_PORT | <port> | <net> | Locate the given subnet if assigned to the given port. Subnet and port are aliases |
| LOCATE | SUBNET | SERVICE | CURRENT | <net> | find the current selected subnet in the service (tasks only) | |
| LOCATE | SUBNET | <srv> | NET_ADDRESS | value | <net> | find the subnet in the service by network-address. Value may include the /prefix |
| LOCATE | SUBNET | <srv> | NET_DESCR | value | <net> | locate subnet by description in service |
| LOCATE | SUBNET | <srv> | NET_NAME | value | <net> | locate subnet by name *or* description in service |
| LOCATE | SUBNET | <srv> | NET_NAME_ NOTFULL | value | <net> | find and conditionally add subnet from an IP-plan by name should the existing be 'full' |
| LOCATE | SUBNET | <srv> | VLAN_ID | value | <net> | find the subnet by vlan-id in the service |
| SUBNET as scope alias | ||||||
| LOCATE | SUBNET | <net> | AT_PORT | <port> | <net> | Locate the given subnet if assigned to the given port. Subnet and port are aliases |
| ASSIGN | SUBNET | <net> | -attribute- | value | assign the subnet attribute a value. replace -attribute- with actual name. | |
| ASSIGN | SUBNET | <net> | ADDR_RESERVATI ON | value | set the subnets address reservation count to value | |
| ASSIGN | SUBNET | <net> | ADDR_RESERVATION_ DEC | value | decrease the subnets address reservation count to value | |
| ASSIGN | SUBNET | <net> | ADDR_RESERVATION_ INC | value | increase the subnets address reservation count to value | |
| ASSIGN | SUBNET | <net> | LINK | <portlist> | make the ports of the link a member of the vlan/subnet | |
| ASSIGN | SUBNET | <net> | MULTICAST | value | set multicast true/false for the subnet | |
| ASSIGN | SUBNET | <net> | NET_DESCR | value | assign this description to the subnet | |
| ASSIGN | SUBNET | <net> | PORT | <port> | make the port a member of the vlan/subnet | |
| ASSIGN | SUBNET | <net> | PORTS | <portlist> | make the ports a member of the vlan/subnet | |
| ASSIGN | SUBNET | <net> | SERVICE | <srv> | re-assign (move) the vlan/subnet to the service indicated | |
| ASSIGN | SUBNET | <net> | VLAN_ID | value | assign this vlan-id to the subnet | |
| ASSIGN | SUBNET | <net> | VLAN_ID_ INCLIENT | value | find and assign the first free vlan-id in client starting at type-value | |
| ASSIGN | SUBNET | <net> | VLAN_ID_ INSERVICE | value | find and assign the first free vlan-id in the service starting at type-value | |
| ASSIGN | SUBNET | <net> | VLAN_ID_ INSITE | value | find and assign the first free vlan-id in site starting at type-value | |
| ASSIGN | SUBNET | <net> | VLAN_TEMPLATE | value | Assigns the subnet a (layer3) Vlan-template | |
| ASSIGN | SUBNET | <net> | VRF | <vrf> | make the vlan/subnet a member of the VRF | |
| DELETE | SUBNET | <net> | COMPLETE | delete subnet, remove from all ports | ||
| DELETE | SUBNET | <net> | PORT | <port> | remove subnet from port | |
| DELETE | SUBNET | <net> | PORTS | <portlist> | remove subnet from ports | |
| DELETE | SUBNET | <net> | VRF | <vrf> | remove subnet from vrf | |
| SUBNET as value alias | ||||||
| ADD | SUBNET | <srv> | FIRSTFREE_ FROM_SUBNET | <net> | <net> | create an ip-plan based subnet using existing subnet-alias. Finds the first free subnet |
| ADD | SUBNET | <srv> | FIRSTFREE_ SUBNET_OFFSET | <net> <offset> | <net> | create an ip-plan based subnet using existing subnet-alias. Finds the first free subnet starting from the provided offset |
| ASSIGN | PORT | <port> | SUBNET | <net> | make the port a member of the vlan/subnet | |
| ASSIGN | PORTS | <portlist> | SUBNET | <net> | make the ports a member of the vlan/subnet | |
| ASSIGN | VRF | <vrf> | SUBNET | <net> | make the vlan/subnet a member of the VRF | |
| DELETE | PORT | <port> | SUBNET | <net> | remove subnet from port | |
| DELETE | PORTS | <portlist> | SUBNET | <net> | remove subnet from ports | |
| DELETE | VRF | <vrf> | SUBNET | <net> | remove subnet from vrf | |
| SUBNET alias in other contexts | ||||||
| ADD | DHCP | <net> | TYPE | value | <dhcp> | create a dhcp data-set for a subnet. Type can be off / relay / scope / dual |
| LOCATE | ADDRESS | <net> | ADDRESS_ FIRSTFREE | value | <addr> | find the first free address in a named range of a subnet |
| LOCATE | ADDRESS | <net> | ADDRESS_ FIRSTFREE | value | <addr> <offset> | find the first free address in a named range of a subnet starting from an offset |
| LOCATE | ADDRESS | <net> | ADDRESS_ LASTFREE | value | <addr> | find the last free address in a named range of a subnet |
| LOCATE | ADDRESS | <net> | PICK | value | <addr> | Select specific address in the subnet if free. Value may be offset or absolute. Negative offsets allowed |
| LOCATE | ADDRESS | <net> | PICK_FORCED | value | <addr> | Select specific address in the subnet. Value may be offset or absolute. Negative offsets allowed |
| LOCATE | DHCP | <net> | CURRENT | <dhcp> | find the dhcp data-set for the subnet | |
| LOCATE | PORT | <port> | AT_SUBNET | <net> | <port> | Locate the given port if assigned to the given subnet. Port and subnet are aliases |
| LOCATE | PORTS | <portlist> | AT_SUBNET | <net> | <portlist> | Locate ports in the given list if assigned to the given subnet. Ports and subnet are aliases |
| ASSIGN | IPV6_NET | <ipv6net> | VLAN_ID_OF | <net> | assign the VLAN_ID of the IPV4-net to the IPV6_NET | |
Dhcp
The DHCP object uses the alias type <dhcp>
| DHCP | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| DHCP as new alias | ||||||
| ADD | DHCP | <net> | TYPE | value | <dhcp> | create a dhcp data-set for a subnet. Type can be off / relay / scope / dual |
| LOCATE | DHCP | <net> | CURRENT | <dhcp> | find the dhcp data-set for the subnet | |
| DHCP as scope alias | ||||||
| ASSIGN | DHCP | <dhcp> | DHCP_DOMAIN | value | define the Dhcp domain name option value | |
| ASSIGN | DHCP | <dhcp> | DNS_SERVERS | value | define the Dns-servers option value. Enter a list of ip-addresses | |
| ASSIGN | DHCP | <dhcp> | LEASE_TIME | value | define the Lease-time option value. Normally in minutes | |
| ASSIGN | DHCP | <dhcp> | NTP_SERVERS | value | define the Ntp-servers option value. Enter a list of ip-addresses | |
| ASSIGN | DHCP | <dhcp> | OPTION1 | value | define the spare option1 value. | |
| ASSIGN | DHCP | <dhcp> | OPTION2 | value | define the spare option2 value. | |
| ASSIGN | DHCP | <dhcp> | RELAY_GROUP | value | define the Dhcp-relay-group option value. | |
| ASSIGN | DHCP | <dhcp> | RELAY_SERVERS | value | define the Dhcp-relay-servers option value. Enter a list of ip-addresses | |
| ASSIGN | DHCP | <dhcp> | SCOPE | value | specify scope-start and scope-end as ip-offsets (0.0.0.50) or numeric-offsets. Scope-end is optional. Separate using space, comma or ' - ' | |
| ASSIGN | DHCP | <dhcp> | SCOPE_ EXCLUDED | value | list of ip-ddresses in the scope to exclude. Separate using space, comma or ' - ' | |
| ASSIGN | DHCP | <dhcp> | TFTP_SERVERS | value | define the Tftp-servers option value. Enter a list of ip-addresses | |
| ASSIGN | DHCP | <dhcp> | TYPE | value | type can be off / relay / scope / dual | |
| ASSIGN | DHCP | <dhcp> | WINS_SERVERS | value | define the Wins-servers option value. Enter a list of ip-addresses | |
| DELETE | DHCP | <dhcp> | COMPLETE | remove the Dhcp data-set from the subnet | ||
Address
The ADDRESS object uses the alias type <addr>
| ADDRESS | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| ADDRESS as new alias | ||||||
| LOCATE | ADDRESS | <net> | ADDRESS_ FIRSTFREE | value | <addr> | find the first free address in a named range of a subnet |
| LOCATE | ADDRESS | <net> | ADDRESS_ FIRSTFREE | value | <addr> <offset> | find the first free address in a named range of a subnet starting from an offset |
| LOCATE | ADDRESS | <net> | ADDRESS_ LASTFREE | value | <addr> | find the last free address in a named range of a subnet |
| LOCATE | ADDRESS | <net> | PICK | value | <addr> | Select specific address in the subnet if free. Value may be offset or absolute. Negative offsets allowed |
| LOCATE | ADDRESS | <net> | PICK_FORCED | value | <addr> | Select specific address in the subnet. Value may be offset or absolute. Negative offsets allowed |
| LOCATE | ADDRESS | <node> | MANAGEMENT | <addr> | Returns the management ip-address for the <node> as an <addr> alias | |
| ADDRESS as scope alias | ||||||
| ASSIGN | ADDRESS | <addr> | PORT | <port> | set a single IP-address on a Management or Loopback interface | |
Ipv6_net
The IPV6_NET object uses the alias type <ipv6net>
| IPV6_NET | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| IPV6_NET as new alias | ||||||
| ADD | IPV6_NET | <srv> | CUSTOM | value | <ipv6net> | add new CUSTOM Ipv6-subnet. No IP-plan is used. Value is the net_name, the ipv6 address range must be assigned later |
| ADD | IPV6_NET | <srv> | NET_NAME | value | <ipv6net> | add an IPV6_NET by name. Value can be “ipv6net_name” or “ipv6_net_name - ipv6_plan_descr” |
| LOCATE | IPV6_NET | <srv> | NET_ADDRESS | value | <ipv6net> | find the IPV6_NET in the service using its Ipv6 network-address. Use the optional prefix to normalize the network-address: <Ipv6_address>/<prefix> |
| LOCATE | IPV6_NET | <srv> | VLAN_ID | value | <ipv6net> | find the IPV6_NET in the service using its Vlan_id. The subnet with the fewest assigned ports is selected. |
| LOCATE | IPV6_NET | <srv> | NET_DESCR | value | <ipv6net> | find the IPV6_NET in the service using its Net_description or Net_name. The subnet with the fewest assigned ports is selected. |
| LOCATE | IPV6_NET | <srv> | NET_NAME | value | <ipv6net> | find the IPV6_NET in the service using its Net_name. The subnet with the fewest assigned ports is selected. |
| LOCATE | IPV6_NET | SERVICE | CURRENT | <ipv6net> | find the current selected IPV6_NET in the service (GUI tasks only) | |
| LOCATE | IPV6_NET | <srv> | IPV6_NET | value | <ipv6net> | find the IPV6_NET in the service using Net_name and Ipv6-plan. Type_value uses the format: <ipv6_subnet_name>-<ipv6_plan_description> |
| LOCATE | IPV6_NET | <ipv6net> | AT_PORT | <port> | <ipv6net> | Locate the given Ipv6 subnet if assigned to the given port. Ipv6 subnet and port are aliases |
| IPV6_NET as scope alias | ||||||
| LOCATE | IPV6_NET | <ipv6net> | AT_PORT | <port> | <ipv6net> | Locate the given Ipv6 subnet if assigned to the given port. Ipv6 subnet and port are aliases |
| ASSIGN | IPV6_NET | <ipv6net> | PORTS | <portlist> | make the ports a member of the Ipv6 vlan/subnet | |
| ASSIGN | IPV6_NET | <ipv6net> | NET_DESCR | value | change the Ipv6 subnet description to “value”. Value defaults to Ipv6_subnet_name | |
| ASSIGN | IPV6_NET | <ipv6net> | NET_DESCR_OF | <ipv6net> | change the Ipv6 subnet description to the description found in subnet-alias of value | |
| ASSIGN | IPV6_NET | <ipv6net> | PORT | <port> | make the port a member of the Ipv6 vlan/subnet | |
| ASSIGN | IPV6_NET | <ipv6net> | VLAN_ID_OF | <net> | assign the VLAN_ID of the IPV4-net to the IPV6_NET | |
| ASSIGN | IPV6_NET | <ipv6net> | VLAN_ID | value | assign this vlan-id to the IPV6_NET | |
| ASSIGN | IPV6_NET | <ipv6net> | VLAN_ID_ INCLIENT | value | find and assign the first free vlan-id in client starting at type-value | |
| ASSIGN | IPV6_NET | <ipv6net> | VLAN_ID_ INSERVICE | value | find and assign the first free vlan-id in the service starting at type-value | |
| ASSIGN | IPV6_NET | <ipv6net> | VLAN_ID_ INSITE | value | find and assign the first free vlan-id in site starting at type-value | |
| ASSIGN | IPV6_NET | <ipv6net> | VLAN_TEMPLATE | value | Assigns the IPV6_NET a (layer3) Vlan-template | |
| ASSIGN | IPV6_NET | <ipv6net> | VRF | <vrf> | ||
| ASSIGN | IPV6_NET | <ipv6net> | -attribute- | value | assign an Ipv6 subnet attribute a value. replace -attribute- with actual name. | |
| ASSIGN | IPV6_NET | <ipv6net> | LINK | <portlist> | make the ports of the link a member of the Ipv6 vlan/subnet | |
| DELETE | IPV6_NET | <ipv6net> | COMPLETE | delete IPV6_NET, remove from all ports | ||
| DELETE | IPV6_NET | <ipv6net> | PORT | <port> | remove IPV6_NET from port | |
| DELETE | IPV6_NET | <ipv6net> | PORTS | <portlist> | remove IPV6_NET from ports | |
| DELETE | IPV6_NET | <ipv6net> | VRF | <vrf> | remove IPV6_NET from vrf | |
| IPV6_NET as value alias | ||||||
| ASSIGN | IPV6_NET | <ipv6net> | NET_DESCR_OF | <ipv6net> | change the Ipv6 subnet description to the description found in subnet-alias of value | |
| ASSIGN | PORT | <port> | IPV6_NET | <ipv6net> | make the port a member of the Ipv6 vlan/subnet | |
| ASSIGN | PORTS | <portlist> | IPV6_NET | <ipv6net> | make the ports a member of the Ipv6 vlan/subnet | |
| ASSIGN | LINK | <portlist> | IPV6_NET | <ipv6net> | make the ports of the link a member of the Ipv6 vlan/subnet | |
| IPV6_NET alias in other contexts | ||||||
| LOCATE | IPV6_ADDR | <ipv6net> | IPV6_ADDR_ FIRSTFREE | value | <ipv6addr> | find the first free IPV6_ADDR in a named range of a IPV6_NET |
| LOCATE | IPV6_ADDR | <ipv6net> | IPV6_ADDR_ LASTFREE | value | <ipv6addr> | find the last free IPV6_ADDR in a named range of a IPV6_NET |
| LOCATE | IPV6_ADDR | <ipv6net> | RANDOM | value | <ipv6addr> | find the first free IPV6_ADDR in a named range of a IPV6_NET |
| LOCATE | PORT | <port> | AT_IPV6_NET | <ipv6net> | <port> | Locate the given port if assigned to the given Ipv6 subnet. Port and Ipv6 subnet are aliases |
| LOCATE | PORTS | <portlist> | AT_IPV6_NET | <ipv6net> | <portlist> | Locate ports in the given list if assigned to the given Ipv6 subnet. Ports and Ipv6 subnet are aliases |
Ipv6_addr
The IPV6_ADDR object uses the alias type <ipv6addr>
| IPV6_ADDR | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| IPV6_ADDR as new alias | ||||||
| LOCATE | IPV6_ADDR | <ipv6net> | IPV6_ADDR_ FIRSTFREE | value | <ipv6addr> | find the first free IPV6_ADDR in a named range of a IPV6_NET |
| LOCATE | IPV6_ADDR | <ipv6net> | IPV6_ADDR_ LASTFREE | value | <ipv6addr> | find the last free IPV6_ADDR in a named range of a IPV6_NET |
| LOCATE | IPV6_ADDR | <ipv6net> | RANDOM | value | <ipv6addr> | find the first free IPV6_ADDR in a named range of a IPV6_NET |
| IPV6_ADDR as scope alias | ||||||
| ASSIGN | IPV6_ADDR | <ipv6addr> | PORT | <port> | set a single IP-IPV6_ADDR on a Management or Loopback interface | |
Mpls_vrf
The MPLS_VRF object uses the alias type <mpls_vrf>
| MPLS_VRF | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| MPLS_VRF as new alias | ||||||
| ADD | MPLS_VRF | CURRENT | VRF_ID | value | mpls_vrf | create or locate new mpls-vrf for this client_type. value is new vrf_id |
| ADD | MPLS_VRF | CURRENT | VRF_NAME | value | mpls_vrf | create or locate new mpls-vrf for this client_type. value is new vrf_name |
| ADD | MPLS_VRF | GLOBAL | VRF_ID_NEW | value | mpls_vrf | create new mpls-vrf for this client_type. value is lowest vrf-id to start search for new id |
| LOCATE | MPLS_VRF | CURRENT | VRF_NAME | value | mpls_vrf | locate mpls-vrf for this client_type. value is new vrf_name |
| LOCATE | MPLS_VRF | CURRENT | VRF_ID | value | mpls_vrf | locate mpls-vrf for this client_type. value is new vrf_id |
| MPLS_VRF as scope alias | ||||||
| ASSIGN | MPLS_VRF | mpls_vrf | -attribute- | value | set the mpls-vrf attribute to the desired value | |
| DELETE | MPLS_VRF | mpls_vrf | COMPLETE | delete mpls_vrf including its node assignments | ||
| MPLS_VRF as value alias | ||||||
| ADD | VRF | <node> | MPLS_VRF | mpls_vrf | <vrf> | create vrf on node using a Mpls_vrf alias. Note: node must have management / loopback address assigned first! |
Vrf
The VRF object uses the alias type <vrf>
| VRF | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| VRF as new alias | ||||||
| ADD | VRF | <node> | VRF_ID | value | <vrf> | create vrf on node using its id. Note: node must have management / loopback address assigned first! |
| ADD | VRF | <node> | VRF_NAME | value | <vrf> | create vrf on node using its name. Note: node must have management / loopback address assigned first! |
| ADD | VRF | <node> | MPLS_VRF | mpls_vrf | <vrf> | create vrf on node using a Mpls_vrf alias. Note: node must have management / loopback address assigned first! |
| LOCATE | VRF | SITE | VRF_ID | value | <vrf> | find a vrf on the site using its id |
| LOCATE | VRF | <node> | VRF_NAME | value | <vrf> | find a vrf on the node using its name |
| LOCATE | VRF | <node> | VRF_ID | value | <vrf> | find a vrf on the node using its id |
| LOCATE | VRF | SITE | VRF_NAME | value | <vrf> | find a vrf on the site using its name |
| VRF as scope alias | ||||||
| ASSIGN | VRF | <vrf> | -attribute- | value | Set the Node_vrf attribute given tin Type_match to the value specified. Vrf_name cannot be changed. | |
| ASSIGN | VRF | <vrf> | NODE | <node> | make node a member of the MPLS vrf specified | |
| ASSIGN | VRF | <vrf> | SUBNET | <net> | make the vlan/subnet a member of the VRF | |
| ASSIGN | VRF | <vrf> | VRF_TEMPLATE | value | Value is Vrf template name | |
| DELETE | VRF | <vrf> | NODE | <node> | remove node from vrf | |
| DELETE | VRF | <vrf> | SUBNET | <net> | remove subnet from vrf | |
| VRF as value alias | ||||||
| ASSIGN | IPV6_NET | <ipv6net> | VRF | <vrf> | ||
| ASSIGN | NODE | <node> | VRF | <vrf> | make node a member of the MPLS vrf specified | |
| ASSIGN | SUBNET | <net> | VRF | <vrf> | make the vlan/subnet a member of the VRF | |
| DELETE | IPV6_NET | <ipv6net> | VRF | <vrf> | remove IPV6_NET from vrf | |
| DELETE | NODE | <node> | VRF | <vrf> | remove node from vrf | |
| DELETE | SUBNET | <net> | VRF | <vrf> | remove subnet from vrf | |
Cmdb
The CMDB object uses the alias type <cmdb>
| CMDB | ||||||
|---|---|---|---|---|---|---|
| exec | class | scope | match | value | alias | description |
| CMDB as new alias | ||||||
| ADD | CMDB | <dom> | NODE | <node> | <cmdb> | Add a node to the CMDB using Domain alias. value = node-alias, nodename or fqdn |
| ADD | CMDB | <dom> | NODE | value | <cmdb> | Add a node to the CMDB using Domain alias. value = node-alias, nodename or fqdn |
| LOCATE | CMDB | CMDB | NODE | value | <cmdb> | Find a node in the CMDB by node name. value = node-alias, nodename or fqdn |
| LOCATE | CMDB | CMDB | NODE | <node> | <cmdb> | Find a node in the CMDB by node name. value = node-alias, nodename or fqdn |
| CMDB as scope alias | ||||||
| LOCATE | CMDB | CMDB | NODE | value | <cmdb> | Find a node in the CMDB by node name. value = node-alias, nodename or fqdn |
| LOCATE | CMDB | CMDB | NODE | <node> | <cmdb> | Find a node in the CMDB by node name. value = node-alias, nodename or fqdn |
| ASSIGN | CMDB | <cmdb> | VENDOR | value | Assign a Vendor to a cmdb-alias/node-name. value = Vendor_type name | |
| ASSIGN | CMDB | <cmdb> | FQDN | value | Assign a fqdn (NodeName) to a cmdb node alias. value = fqdn or ip-address | |
| ASSIGN | CMDB | <cmdb> | DOMAIN | value | Assign a Domain to a cmdb-node/node-name. value = Domain | |
| ASSIGN | CMDB | <cmdb> | -attribute- | value | Assign a value to any attribute of a cmdb-node/node-name. Replace -attribute for attribute name. value = attribute value | |
| DELETE | CMDB | CMDB | NODE | <node> | Delete a node from the CMDB by node name. value = node-alias, nodename or fqdn | |
| DELETE | CMDB | CMDB | NODE | value | Delete a node from the CMDB by node name. value = node-alias, nodename or fqdn | |
| CMDB object in other contexts | ||||||
| ASSIGN | CMDB | <node> | VENDOR | value | Assign a Vendor to a cmdb-alias/node-name. value = Vendor_type name | |
| ASSIGN | CMDB | <node> | FQDN | value | Assign a fqdn (NodeName) to a cmdb-node/node-name. value = fqdn or ip-address | |
| ASSIGN | CMDB | <node> | DOMAIN | value | Assign a Domain to a cmdb-node/node-name. value = Domain | |
| ASSIGN | CMDB | <node> | -attribute- | value | Assign a value to any attribute of a cmdb-node/node-name. Replace -attribute for attribute name. value = attribute value | |
guides/reference/servicetypes/servicetypes_syntax.txt · Last modified: 2024/07/03 12:31 by 127.0.0.1