======Verify if tacacs is configured ======

TACACS+ is a security application that provides centralized validation of users attempting to gain access to a router or network access server.
Below example helps in validating tacacs configuration using NetYCE Compliance module

===Example config===
campus01-b02-access01 and campus01-b02-access02 are the two reference devices which we are using for this example.  One has tacacs configuration and other does not. 

==campus01-b02-access01#==

{{:guides:user:compliance:compliance:howto:cpl5_1.png}}

==campus01-b02-access02#==
{{:guides:user:compliance:compliance:howto:cpl5_2.png}}

===How its done===
Below are the steps to create new policy.
//Operate -> Compliance -> Policies -> New->//
{{:guides:user:compliance:compliance:howto:cpl5_3.png}}

Click on the Node Group to select the relevant group of devices to add.
Node group named "building2_access" holds the nodes of both the nodes:
{{:guides:user:compliance:compliance:howto:cpl1_4.png}}

Rule -> New

{{:guides:user:compliance:compliance:howto:cpl5_5.png}}


===Report/test results:===
Below is how to create reports to see the results of the compliance policies.

//Operate -> Compliance -> Reports -> New -> Report Name “test” -> Report type “Policies” -> Policy Name “Sample5 : TACACS Configuration” -> Show Report//

{{:guides:user:compliance:compliance:howto:cpl5_6.png}}

This was a simple example to understand how to implement compliance policy to verify tacacs configuration.