Technical documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== FAQ topics =====

**Q** I'm logged in the GUI but can't see the grids.\\
**A** You are trying to use the FQDN while the application is set to using the IP address or the other way around. Run ''yce_setup.pl'' and set DNS resolved to either yes/no, depending on your environment.

**Q** After logging in nothing is shown at all.\\
**A** Make sure you are allowed to access the NetYCE system using either TCP port 80/443 and port 8080. See: [[guides:reference:connection_matrix|YCE Connection matrix]]

**Q** Where do I find the latest patches and licenses? \\
**A** [[https://wiki.netyce.com/doku.php/downloads:system_updates:system_updates | Patches and licenses]]

**Q** Can't access the GUI, showing ''<nowiki>{{ version }}</nowiki>'' \\
**A** Make sure you've run '[[maintenance:general:tools:net_setup.pl|net_setup.pl]]' as root, '[[maintenance:general:tools:yce_setup.pl|yce_setup.pl]]' as 'yce'-user.
  - verify all processes are running using 'go ps'
  - if mysql is not running, execute: mysql_repair.sh as 'yce'-user
  - execute 'go up' for the remaining processes
  - Make sure all necessary ports are reachable, [[guides:reference:connection_matrix|connection matrix]]

{{:downloads:gops.png?nolink |}}