Differences

This shows you the differences between two versions of the page.

--- maintenance:releases:historical:releasenotes_620 [2019/12/23 16:11] – ↷ Links adapted because of a move operation yspeerte
+++ maintenance:releases:historical:releasenotes_620 [2024/07/03 12:31] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+===== NetYCE 6.2.0 =====
+**Status as of March 25, 2015**
+>> <color orange>Version of 6.2.0 was finalized at 2015-03-06</color>
+> Note: <color red>Version 6.2.0 will require an update to the YCEperl installation</color> \\ See notes at bottom of this article.
+=== Fixes: ===
+  * Nexus '(config-xxx)#^H#’ prompt detect fails on some nodes
+  * HP prompt detect failed for some config-object-paths
+  * HP device ‘end’ command when ‘quit’ should be used
+  * Nexus commit skipped
+  * Retrieving csv reports using MSIE blocked
+  * Search does not filter client/site
+  * Nexus [####    ] progress on save filtered from log
+  * Cannot use ‘Enter’ key on notes-field sites details form
+  * Width of Vlan field in subnet details
+  * Site details form VZP / Ref-code not shown/saved
+  * Nexus error messages incomplete
+  * Link to files from jobs (name change)
+  * Nexus backspaces in command echo’s: wor ^Hd instead of ‘word’
+  * Removed ‘[## ] from historic Nexus job-logs
+  * ML3 migration ‘finish’ not renaming nodes issue
+  * Nexus error message “vpc already exists” demoted to warning level.
+  * Corrected (numeric) sorting issues with some drop-down menus.
+  * Fixed some sorting issues in grids and drop-down menus.
+  * Renamed template save into 'export', load into 'import'. Fixed issue with import.
+  * Infoblox API update fails due to UTF-8 quotes used in newer versions
+  * In command-jobs tool corrected missing 'deselect all' after 'select all' was used
+  * Some forms have variable fields that are too narrow for the value to be shown completely.
+  * eVPN details accessed from Node-details form are not properly selected
+  * Some servers fail to be created from the 'servers - custom' form
+  * Fixed issue with service-type delete-ports-subnet
+=== Enhancements: ===
+  * Template #wait directive support. See [[menu:build:templates:template_edit#Direcives|Template directives]]
+  * The 'Operatie - Tools - Ping tool' has been reworked to allow free-form ip- and host-address pinging of interfaces too. See [[menu:operate:tools:ping|Ping nodes]]
+  * The 'Node topology - Add subnets’ form now supports multiselect on ports AND subnets allowing for quick assignment of a series of subnets to a range of ports on a device, including connected interfaces when topology exist.
+  * The ‘Build’ main-form ‘search’ function has been extended and optimized.
+  * Password-sensitive fields in the database are now stored encrypted in the database. Includes customer-based key-management and customizable field-selection. Encryption uses AES256 algorithm. See [[guides:reference:database:encryption|Encryption]]
+  * Support of customizable ‘Change-id’ requirements in jobs. See [[guides:reference:jobs:job_configuration|Job Configuration]]
+  * Support of Job approvals. Each job-type can be assigned requirements on job-approvals before being executed. The approval requirements can be defined in high detail using thresholding, limiting and authorisation level parameters. Jobs requiring approval are listed as ‘pending’. See [[guides:reference:jobs:job_configuration|Job Configuration]]
+  * Reworked ‘Scheduled jobs’ tool to support Job filtering (change-id, status, jobs-id, user), manipulation (cancel, suspend, resume, now) and approvals (approve, reject, comment). See [[menu:operate:job_status:scheduled_jobs|Scheduled jobs]]
+  * Job notifications. Email notifications can be sent automatically for jobs pending approval (sent to user-group email-list of job owner). Also notifications can be issued for approval rejections, job cancellations or expiry (sent to owner).
+  * New customizable tool-setup XML file where scheduler queue and per-job-type configurations can be made (approvals, notifications, auditors, change-id validations)
+  * Local NetYCE Wiki installation and customer-enabled updates. See [[maintenance:downloads:wiki_updates|Download WIKI installation files]]
+  * Extended job-tools with text-box entry for 'SiteCode' values
+  * Subnet name and Subnet description now have distinctive references in the forms. Description is shown were relevant
+  * Many forms now allow for column sorting in its primary grids
+  * Form-fields not available for editing (role-dependent) are now visually distinguishable
+  * To distinguish the various NetYCE servers more easily, each server-button in the title bar can be assigned is own (customizable) text and button color.
+  * Databases now use utf8 throughout. VBA dependencies prevented this conversion
+  * HP Comware-7 vendor module
+  * Additional tools that support 'Change-id' field and customizable approval settings
+=== Optional trial release ===
+  * A rewrite of the service types including enhanced syntax checking and full API and custom-variables
+> Notes regarding YCEperl upgrade:
+> 1) When running MariaDB, ensure MariaDB-devel is installed: \\ ''yum list installed | grep -i mariadb-devel'' \\ if not, install using ''sudo yum install MariaDB-devel''
+> 2) Should the command ''ck_license -X'' produce errors (with db running), recompile DBD::mysql using: \\ ''/opt/ycelib/perl/bin/cpanm --force DBD::mysql''