Differences

This shows you the differences between two versions of the page.

--- maintenance:general:netyce_prerequisits [2021/04/07 07:33] – created bdorlandt
+++ maintenance:general:netyce_prerequisits [2024/07/03 12:31] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== NetYCE installation prerequisites ======
+Presented below is a quick overview of the important prerequisites when using NetYCE. Where especially the server section is important if NetYCE is to be used on a shared server.
+===== Node Communication =====
+  * Requires a functional user to connect to all devices (or per group/domain)
+  * Requires direct connectivity to the node on the IP address provided
+  * Requires direct connectivity from the node to the NetYCE server to support backups (NCCM) on the desired/supported protocol (tftp, ftp, sftp, scp)
+The [[guides:reference:connection_matrix|connection matrix]] showing the connectivity requirements.
+===== Server =====
+When using the NetYCE provided VM the below is taken care of. They are applicable if NetYCE is to be used on a shared server.
+  * Centos/RHEL 7, x86_64 arch
+  * SElinux not supported
+  * MariaDB supported versions 10.0 - 10.4
+  * communication ports fully 'owned' by own daemons
+    * (tftp, ftp, httpd, scheduler, xch-api, restful-api, backend)
+    * some port-numbers can be re-assigned, but most are industry-standard
+    * manages httpd, mysql/mariadb, vsftpd configuration files
+  * ssh server is to support [[maintenance:general:file_transfer_account_setup#scp_and_sftp_setup|MySecureShell]]
+  * minimal root-privileges
+    * process-manager, ssh, httpd, vsftpd run as 'root', all other processes as 'yce'
+    * some sudo setup requirements apply
+  * Require shared 'yce' and 'ycicle' userid's
+  * not-configurable paths
+    * /opt/yce/
+    * /opt/ycelib
+    * /var/opt/yce
+    * /var/opt/mysql
+    * /var/opt/shared