@version:3.5 @include "scl.conf" # RHEL7 syslog-ng configuration file for NetYCE. # # This should behave pretty much like the original syslog on RedHat. # See syslog-ng(8) and syslog-ng.conf(5) for more information. # # Note: it also sources additional configuration files (*.conf) # located in /etc/syslog-ng/conf.d/ options { flush_lines (0); time_reopen (10); log_fifo_size (1000); chain_hostnames (off); use_dns (yes); use_fqdn (yes); create_dirs (no); keep_hostname (yes); keep-timestamp (no); }; source net { tcp(); udp(); }; source s_sys { system(); internal(); # udp(ip(0.0.0.0) port(514)); }; destination d_logs { file( "/var/opt/yce/logs/syslog-ng.log" owner("yce") group("nms") perm(0644) ); }; destination d_cons { file("/dev/console"); }; destination d_mesg { file("/var/log/messages"); }; destination d_auth { file("/var/log/secure"); }; destination d_mail { file("/var/log/maillog" flush_lines(10)); }; destination d_spol { file("/var/log/spooler"); }; destination d_boot { file("/var/log/boot.log"); }; destination d_cron { file("/var/log/cron"); }; destination d_kern { file("/var/log/kern"); }; destination d_mlal { usertty("*"); }; filter f_kernel { facility(kern); }; filter f_default { level(info..emerg) and not (facility(mail) or facility(authpriv) or facility(cron)); }; filter f_auth { facility(authpriv); }; filter f_mail { facility(mail); }; filter f_emergency { level(emerg); }; filter f_news { facility(uucp) or (facility(news) and level(crit..emerg)); }; filter f_boot { facility(local7); }; filter f_cron { facility(cron); }; log { source(net); destination(d_logs); }; log { source(s_sys); filter(f_kernel); destination(d_kern); }; #log { source(s_sys); filter(f_kernel); destination(d_cons); }; log { source(s_sys); filter(f_default); destination(d_mesg); }; log { source(s_sys); filter(f_auth); destination(d_auth); }; log { source(s_sys); filter(f_mail); destination(d_mail); }; log { source(s_sys); filter(f_emergency); destination(d_mlal); }; log { source(s_sys); filter(f_news); destination(d_spol); }; log { source(s_sys); filter(f_boot); destination(d_boot); }; log { source(s_sys); filter(f_cron); destination(d_cron); }; # Source additional configuration files (.conf extension only) @include "/etc/syslog-ng/conf.d/*.conf" # vim:ft=syslog-ng:ai:si:ts=4:sw=4:et: